Error 1032 · CNC 8055 M · CNC 8055 T
Message: Spindle gear not defined in M19.
Detection
During execution.
Cause
"M19" has been programmed, but none of the gear change functions "M41", "M42", "M43" or "M44" are active.
Solution
On power-up, the CNC does not assume any gear; Therefore, if the gear change function is not generated automatically (spindle parameter AUTOGEAR(P6)=NO), the auxiliary gear change functions ("M41", "M42", "M43" or "M44") must be programmed.
