Error 0058 · CNC 8055 M · CNC 8055 T
Message: Do not program a GANTRY axis.
Detection
While editing at the CNC or while executing a program transmitted via DNC.
Cause
The possible causes are:
- When trying to move an axis alone while being slaved to another one as a GANTRY axis
- When defining an operation on a GANTRY axis. (Definition of work zone limits, planes, etc.).
Solution
The solution for each cause is:
- A GANTRY axis cannot be moved separately. To move a GANTRY axis, its associated axis must be moved. Both axes will move at the same time.
Example: If the Y axis is a GANTRY axis associated with the X axis, an X axis move must be programmed in order to move the Y axis (together with the X axis).
GANTRY axes are defined by machine parameter.
- The axes defined as GANTRY cannot be used in the definition of operations or movements. These operations are defined with the main axis that the GANTRY axis is associated with.
