Error 3730 · CNC 8058 / 8060 / 8065
Message: TOUCHPROBE: The selected flank will be ignored because it is different from the active one
Detection
When the PLC is executing a TOUCHPROBE command.
CNC 8058
Cause
The PLC has tried to execute a probing action, but the probe is being used by a previous TOUCHPROBE command or both commands use different flanks.
Solution
In simultaneous probing operations on different axes, either the same probing flank must be used or the probing operations must be carried out with different probes.
ꞏ154ꞏ
