Error 2007 · CNC 8058 / 8060 / 8065 · CNC 8070
Message: While G138 is active, G40 is not allowed after the first compensation block
Detection
During execution.
Cause
After activating tool radius compensation with the direct method (G138), a compensation cancellation has been programmed before the first motion block.
Solution
To activate tool radius compensation with the direct method (G138), the CNC needs an additional block in the plane besides the activation block. The CNC allows canceling tool radius compensation after this movement. If this block cannot be programmed, use the indirect method (G139) to activate tool radius compensation.
ꞏ110ꞏ
